性能與特點

                                                                                        1、系統可設定二種動作模式。

                                                                                        a、潤滑：開機時先執行潤滑時間計時。b、間歇：潤滑完成后執行間歇時間計時。

                                                                                        2、潤滑時間和間歇時間均可調整。

                                                                                        3、設有液位開關、壓力開關(可選配)。當油量或壓力不足時，蜂鳴器會發出報警、并將異常信號輸出。

                                                                                        4、系統時間調整范圍:

                                                                                        “LUB”潤滑時間：2秒，4秒，8秒，16秒，25秒；   

                                                                                        “INT”間歇時間：8分，15分，30分，60分，120分。（特殊要求可定制）

                                                                                        5、面板指示燈可顯示出注油機的潤滑和間歇的狀態。

                                                                                        6、系統可使用“RST”鍵，強制潤滑或消除異常報警信號。

                                                                                        7、單次最長潤滑時間≤2min，間歇時間通常為潤滑時間的5倍以上。

                                                                                        8、電機設有自我保護功能，防止電機溫度過高及過載。

                                                                                        9、在容積式系統中設有脫壓裝置，需配合BFA/BFC/BFB/BFD/BFE分配器使用。

                                                                                        10、設有溢流閥，可保護注油機及管路由于壓力過高而損壞。